top of page
Facilities
Laser Confocal Microscope
The Laser Confocal Microscope(雷射共軛顯微鏡) is perfect for surface observation. With its micro-meter scale resolution, researchers can capture sureface morphology and know the roughness and even more.
*This facility is open for others, please contact us for more details.
本儀器開放委測，若欲詢問請聯絡以下人員:
hugochen64@gmail.com 陳俋平
J55 Prime Printer
J55 Prime Printer is a polyjet printer developed by Stratasys. It is capable of composite polymer 3D printing. It can produce interlocking or gradient and even more complicated structure for demonstrations.
Refer to Here fore more.
*This facility is open for others, please contact us for more details.
本儀器開放委測，若欲詢問請聯絡以下人員:
david78978@gmail.com 劉辰轅
Universal Testing Machine
A mechanic testing device that is able to perform several standard mechanical testing including uniaxial compression, tension and three-point bending. Maximum load cell capacity is 30kN.
*This facility is open for others, please contact us for more details.
本儀器開放委測，若欲詢問請聯絡以下人員:
hugochen64@gmail.com 陳俋平
From 3+ SLA Printer
From 3+, an additive manufacturing device introduced by formlab, is a device basing on SLA techniques. It is suitable for designing small compartments with fine surface quality.
*This facility is open for others, please contact us for more details.
本儀器開放委測，若欲詢問請聯絡以下人員:
anniebobo17@gmail.com 鄧婷安
Ultimaker FDM Printer
Ultimaker is an additive manufacturing device which base on FDM techniques. It could generate vast amount of simple structure with lower cost. Recommened for the first-time user of additive manufacuring.
*This facility is open for others, please contact us for more details.
本儀器開放委測，若欲詢問請聯絡以下人員:
yungya.moo@gmail.com 莊詠雅
Contact Angle Goniometer
The contact angle goniometer use sessile drop method to detect the static contact angle, advanced and receding angles. Automatic drop control can set the drop volume and drop rate. Surface free energy can obtained from the software by apply two or more kinds of liquid.
*This facility is open for others, please contact us for more details.
本儀器開放委測，若欲詢問請聯絡以下人員:
anniebobo17@gmail.com 鄧婷安
Critical Point Drying
SAMDRI®-795 is a semi-automatic critical point dryer for preparing biological SEM sample. This machine is able to preserve the structure of sample by substituting the water constituent in the sample with carbon dioxide. The treated sample can do further investigation in SEM.
Precision Cutting Machine
Precision cutter used for sample preparation, with 40W powerful DC motor, variable speed 0-400 rpm, with micrometer for sample positioning(0.01~25mm), V-shape fixture, weight load of cutting : 0~400g, automatic cut-off switch, AC 110V, 1 phase.
Digital Balance
Shimadzu TX223L, capacity: 220g, minimum display: 0.001g, with sliding glass door(windbreak system).
Polishing Machine
P20F-1-HA is a machine designed for polishing the surfaces. Using different grid of sandpaper and polishing liquid can polish the surface. The grid number of polishing powder has 1, 0.3 and 0.05 micrometer.
Stereo Microscope
OLYMPUS SZX7 is equipped comfort view, which provides greater comfort to let the work performance faster. The result is a field of view that is easy to find, comfortable to view, and easy to maintain. Magnification range: 8x-56x (using a 1x objective/10x eyepiece); zoom ratio 7:1.
Ultrasonic Cleaner
The clean function of ultrasonic wave is to use the waves over the frequency of human hearing conducting within the liquid. When ultrasonic waves, longitudinal waves, are conducting within the cleaner, which pushing function for the medium will enable the pressure within the liquid to change and produce mini vacuum bubbles referred as "Cavitation".
bottom of page